Some homes need a full rewire. Others just need one outlet fixed. We handle both, and everything in between. Our work covers the full range of residential and commercial electrical needs, from the everyday repair to the larger project that takes planning and permits.
Here is a look at what we do:
Every job is handled by licensed electricians who know the code, know the area, and know how to get the work done cleanly. Give us a call and we'll get the power sorted.
Electric vehicle ownership has grown steadily across the Dallas-Fort Worth suburbs, and Duncanville homeowners who commute across Dallas County are among those making the switch. Installing a Level 2 charger at home means running a dedicated circuit from your panel, sizing the circuit correctly for the load, and making sure your panel has the capacity to handle it. If your current panel is already near its limit, we can assess whether an upgrade is needed before the circuit goes in. We handle the electrical side from panel to outlet, so you have a safe, code-compliant circuit ready to go.
North Texas weather is hard on electrical systems. Lightning strikes, summer storms, and grid fluctuations can send voltage spikes through your wiring in an instant, and the damage to appliances, electronics, and circuits can be significant. Whole-home surge protection installs at the panel and guards every circuit in the house against those spikes. It is one of the more practical upgrades a Duncanville homeowner can make, and it takes a single service call to have it in place.
Texas grid reliability has been a real concern in recent years, and storm season adds another layer of uncertainty. A backup generator is only as useful as the transfer switch and wiring that connect it to your home. We install transfer switches, run the generator wiring, and make sure the hookup meets code so the system works safely when the power goes out. One call, and an electrician is on the way.
We've wired this area long enough to know what works, and we have seen just about every wiring situation a home or business can present. Anna's Electric started in Duncanville in 1995, built around the idea that local homeowners and business owners deserve a crew that knows the area and takes the work seriously. We've wired and repaired homes all over this area, from older neighborhoods with knob-and-tube wiring that needed full replacement to newer construction that just needed a few circuits added for a kitchen remodel or home addition.
Over three decades, we have worked on everything from single-family homes to retail spaces, warehouse facilities, and office buildouts. We have handled basement finishing projects, bathroom and kitchen remodels, and aluminum-wiring remediation in homes from the 1960s and 1970s. That range of experience means we can look at a job and know what it involves before the first wire is pulled. We take pride in the electrical work we leave behind, and that is not something that changes from job to job. We'll make your wiring safe again.
Your time matters, so we keep the wiring job on schedule, whether you are a homeowner trying to get a renovation finished or a property manager with a tenant waiting on a repair. We work with both, and the standard of work is the same either way.
For homeowners, we handle everyday repairs, safety inspections before a home sale, older-home rewiring, and additions or remodels that need new circuits and panel capacity. If you are buying a home and the inspector flagged the panel or the wiring, we can walk through what the report means and give you an honest estimate of what the work involves.
For commercial clients, including property managers, office tenants, retail operators, and warehouse facilities, we handle panel upgrades, commercial lighting installation, dedicated circuits for equipment, and ongoing electrical repair. Electrical safety inspections are a practical fit for both residential and commercial clients who want to know the condition of their wiring before a problem develops. The wiring done right the first time is what keeps tenants, customers, and families safe. Reach out and we'll start at the panel.
Seeing flickering lights or a warm outlet? Those are signs that something in the wiring needs attention, and waiting rarely makes it better. We make it easy to get an electrician on the job quickly, with same-day scheduling available for most service calls and 24/7 availability when you are dealing with a genuine electrical emergency.
On pricing: electrical work varies in cost depending on what the job involves. A panel upgrade is a different scope than a single outlet repair, and the condition of the existing wiring affects what a rewiring project takes. We explain the scope and the cost before any work begins. No surprise fees. No charges for work you did not agree to. Call for a quote and we will give you a clear picture of what the job involves and what it will cost.
Work is performed by licensed electricians, and every job is done to code. That matters for your safety, and it matters if you ever sell the property.
Flickering lights fixed. Dead outlets revived. Power back on.
We are based in Duncanville and serve the surrounding communities across Dallas County and the southern metro. If you are in any of these areas, we can get an electrician to you:
Response time matters when you have an electrical problem, and our familiarity with these communities means we know the roads, the neighborhoods, and the types of homes and businesses we are walking into. We are close by, and we stay responsive across the whole area we serve.
We have been handling electrical work in Duncanville and across Dallas County since 1995, which is more than 30 years of service calls, panel upgrades, rewires, and repairs in this community. That kind of local history means we know the housing stock, the common wiring issues, and the neighborhoods we work in.
This is a locally owned and operated business, and the people who answer the phone are the same people who show up and do the work. You are not dealing with a layer of management between you and the electrician on your job.
We've wired and repaired homes all over this area, and we have seen the full range of what older construction looks like behind the walls. Knob-and-tube wiring, aluminum branch circuits, and undersized panels from the 1970s and 1980s are all familiar territory for us. That experience means fewer surprises on the job and a clearer picture of what a home actually needs.
We stand behind the electrical work we leave behind. If something is not right after a job, call us and we will come back and make it right. We do not consider a job finished until the work is solid and the customer is satisfied.
We pick up the phone and respond promptly. Same-day service is available for most calls, and we are reachable every day from 5:00 AM to 8:30 PM. For urgent situations, we take those calls seriously and prioritize getting an electrician out quickly.
We do. We source materials locally where we can, and we have built relationships across the community over more than three decades. Being locally owned means we have a stake in the area beyond just the jobs we complete.
Anna's Electric is ready to take your call. Same-day service is available for most jobs, and we are reachable around the clock when an emergency comes up. Whether you need a repair, an inspection, a panel upgrade, or a new circuit installed, we will give you a straight answer on what it takes and get it scheduled.
Schedule it. We wire it. You're powered.
Call (469) 249-3264 for a quote or to book a service call. A real electrician is ready to help.
Below is a quick look at the electrical services we offer to homeowners, landlords, and business owners in Duncanville and the surrounding Dallas County area. Whether you need a single outlet fixed or a full panel replacement, we show up ready to work and get it done right. Use this table to find the service that fits your situation, then call us for a straight quote.
| Service Type | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Safety Inspections |
| home buyers, sellers, landlords, and anyone planning a renovation | An inspection before a sale or renovation permit can catch issues early, when they are straightforward to address. |
| Electrical Panel Upgrades |
| older homes with undersized panels or any property adding significant new electrical load | Panels from the 1970s and 1980s were not built for today's loads. A properly sized upgrade protects the whole system. |
| Wiring & Circuit Installation |
| homes adding equipment, finishing a basement, or expanding a workspace | Every new circuit starts with a load check at the panel to confirm available capacity before we pull wire. |
| Breaker & Fuse Repair |
| homes or businesses where a breaker keeps tripping or will not hold | A breaker that trips repeatedly is telling you something. We find out why before we reset or replace it. |
| Older-Home Rewiring |
| older Duncanville homes with wiring that was never built for modern electrical loads | We use code-compliant materials and ensure proper grounding and bonding throughout. Work is performed by licensed electricians. |
| Backup Generator Installation |
| homeowners who want to stay powered through Dallas-area storms and outages | A properly installed transfer switch prevents back-feeding the utility line. We handle all the wiring; the generator unit is your purchase. |
| Whole-Home Surge Protection |
| any home with electronics, appliances, or equipment worth protecting from voltage spikes | North Texas lightning and grid fluctuations can fry appliances in seconds. One panel-level device protects every circuit in the house. |
| Basement & Sump-Pump Circuits |
| homeowners finishing a basement or adding a sump pump to a lower level | Wet locations require GFCI protection by code. We wire the circuit and install the right outlet type for the environment. |
| Electrical Repairs & Troubleshooting |
| homeowners and businesses with an active electrical problem | A burning smell near a panel or outlet is a same-day call. We diagnose the root cause before we fix anything. |
| Lighting Installation |
| homeowners upgrading interior lighting or adding outdoor safety lighting | Outdoor fixtures we install are weatherproofed for Texas conditions, including heat, humidity, and storm exposure. |
| Ceiling Fan Installation |
| rooms without existing fan wiring or homeowners replacing an old unit | If no ceiling box or wiring exists, we run the circuit and install a rated fan box before mounting the fixture. |
| Wiring for Additions & Remodels |
| homeowners expanding living space or contractors needing a reliable electrical sub | We coordinate with your project timeline so the electrical rough-in does not hold up the rest of the build. |
| Outlet & Switch Installation |
| any room missing modern outlet protection or needing updated controls | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas. We can bring a home up to standard in a single visit. |
| EV Charger Installation |
| homeowners adding an electric vehicle and needing a proper home charging setup | Most Level 2 chargers require a dedicated 50-amp circuit. We confirm panel capacity and run the circuit to your garage or parking area. |
How do I know if my home needs a panel upgrade?
If your breakers trip often, you are adding large appliances or an EV charger, your home still has a 100-amp or smaller service, or your panel is from the 1970s or 1980s, those are all signs worth discussing with us. We start with a load calculation to see what the panel is actually handling versus what it was built for, then give you a clear recommendation.
What causes a breaker to keep tripping?
A breaker that trips repeatedly is usually overloaded, has a short circuit on the line, or is simply worn out and failing. It can also mean a circuit is carrying more load than it was designed for. We trace the circuit, identify the cause, and fix the actual problem rather than just resetting the breaker and hoping it holds.
Is electrical work in Duncanville permitted and inspected?
Permits are required for most significant electrical work, including panel replacements, service upgrades, and new circuit installations. We handle the work to code so it is ready for inspection. If you are unsure whether a specific job requires a permit, ask us when you call and we will walk you through it.
Same-Day and Emergency Availability
Most service calls in the Duncanville area can be scheduled the same day you call. For urgent situations, we are available every day from 5:00 AM to 8:30 PM and we take those calls seriously.
How do I know if the wiring in my older home is safe?
Homes built before the 1980s sometimes still have knob-and-tube wiring, aluminum branch circuit wiring, or panels that were never designed for today's electrical loads. An electrical safety inspection gives you a clear picture of what is behind the walls. We flag real concerns and tell you plainly what needs attention and what is fine as-is.
What do flickering or dimming lights usually mean?
Occasional flickering when a large appliance kicks on can be normal, but persistent flickering, dimming across multiple rooms, or lights that flicker with no obvious cause often point to a loose connection, an overloaded circuit, or a panel issue. These are worth having us look at, especially if the flickering is getting worse over time.
Is a warm or buzzing outlet dangerous?
Yes. A warm outlet, a buzzing sound from a receptacle or switch, or visible discoloration around a cover plate are all signs of a wiring problem that can become a fire hazard. Turn off the breaker feeding that outlet if you can do so safely, stop using it, and call us. We treat those calls as urgent.
Work Performed by Licensed Electricians
Every job we take on is handled by licensed electricians who know the code requirements for Dallas County and show up prepared to do the work right the first time.
What does a whole-home surge protector actually do?
A panel-level surge protector intercepts voltage spikes before they reach your circuits. A power strip protects one outlet. A whole-home device installed at the panel protects every circuit in the house, including appliances, electronics, and any equipment connected to your wiring. In North Texas, where lightning and grid fluctuations are common, it is a practical investment.
What does generator installation involve on the electrical side?
We handle the transfer switch, the dedicated circuit, and the connection to your panel. The transfer switch is the critical piece: it isolates your home from the utility line so the generator runs safely without back-feeding live power onto the grid. We work with both standby generator setups and portable generator hookups. The generator unit itself is your purchase; we handle everything on the wiring side.
Upfront Quotes With No Surprise Fees
We give you a straight answer when you call: what the job involves and what it will cost before anything starts. If the scope changes on-site, we talk it through with you before we proceed.
Can I add an EV charger to my existing panel?
Most Level 2 home chargers require a dedicated 240-volt, 50-amp circuit. Whether your panel can support that depends on the available capacity and how it is currently loaded. We check the panel first, confirm there is room, and run the circuit to your garage or parking area. If the panel needs an upgrade first, we will tell you upfront.
How do estimates and pricing work?
Electrical pricing depends on the scope of the job, the materials involved, and the time required. We do not publish flat rates because a panel replacement and a single outlet swap are very different jobs. When you call, we ask a few questions about what you are seeing or what you need done, and we give you a real number before any work starts. No vague ranges, no surprise charges after the fact.
Can you get an electrician out the same day?
We offer same-day availability for most service calls in and around Duncanville. For situations that cannot wait, we are available every day from 5:00 AM to 8:30 PM. Call us and we will tell you exactly when we can be there.
Call (469) 249-3264 and we will walk you through what the job involves and give you a clear quote before any work begins.
(469) 249-3264